Lifting Magnet

Lifting Magnets provide a quick and efficient means to lift ferrous materials, such as steel plates, forgings and die castings. Common industrial uses include: machine shops, industrial processing plants and warehouse facilities. These permanent industrial magnets require no electricity, eliminating hazards caused by an interruption in power service.

Permanent Ceramic magnet material is mounted into a stainless steel casing. It's multiple pole design, directs the magnetic flux to the magnetic face where extreme holding capacities are obtained. The lifted material can then be quickly released from the permanent magnetic face by depressing the cam assembly located at one end of the lift magnet.

Rare Earth Lifting Magnets provide a quick and efficient means to lift ferrous materials, such as steel plates, forgings and die castings. Common industrial uses include: machine shops, industrial processing plants and warehouse facilities. These permanent magnets require no electricity, eliminating hazards caused by an interruption in power service.

The lifting magnet must be in contact with a ferrous part before attempting to turn on. Simply rotate the switching lever counter clockwise until it snaps securely into the safety catch. When the part is set down, slide the safety catch back to release the lever. The lever may spring back when released from the safety catch.

Standard Features:

• Rare Earth lift magnets contain an internal release devise that does not contact or damage the surface of the part being lifted.
  
• A safety catch ensures the lifter cannot be turned off automatically.
  
• To maintain Safety Standards, lift magnets should be used at 1/3 of their maximum lift capacity rating.
  
• Lift capacity is reduced on Sheet or Plate material with SAG, caused by the material's overhang from the position of the Lift Magnet.

CAUTION!

You should never stand under a load that is being lifted.